Description
Resin Dog House with Vents – Coffee
This outdoor dog house is moulded from robust resin and finished in a warm coffee brown, offering a discreet, natural appearance that blends well with garden surroundings. The structure is designed to remain outside in all seasons, providing a dry, shaded shelter for a dog that spends time in the yard or on the patio. Built‑in vents support steady airflow, which helps regulate the interior temperature and reduce stuffiness, while the resin material itself does not absorb water, warp, or rust.
- Suitable for: Designed for small to medium breeds weighing up to approximately 12 kg, such as Beagles, Cocker Spaniels, or Jack Russell Terriers. The interior space allows one dog to stand, turn, and lie down comfortably. Two very small dogs may share if they are closely bonded, though the house is primarily intended as a single‑dog shelter.
- Ideal scenarios: Place in a garden, on a deck, or inside a secure kennel run. It serves well as a daytime rest spot for a pet that enjoys fresh air, or as a permanent outdoor bed for a working dog. The coffee colour complements wooden fencing, shrubs, and earthy tones, making the house less visually prominent.
Material: The house is made from heavy‑duty, UV‑stabilised polypropylene resin. The walls are double‑layered in parts to provide additional rigidity, and the floor is slightly elevated on moulded feet to prevent ground moisture from seeping in. The colour is mixed through the resin, so minor scratches are not easily seen.
Structure and features: The house is assembled from a few interlocking panels that clip together without the need for tools. The roof may be pitched or flat, with a slight overhang to direct rain away from the entrance. Vents are shaped to allow air movement while keeping driven rain out. The entrance is offset, offering some protection from wind. The resin floor has a textured surface to provide grip for the dog’s paws. The panels are smooth and wipeable, with no sharp edges.
Care and maintenance: The house can be rinsed with a garden hose and wiped down with mild soap. The panels separate easily for deep cleaning. Ensure the interior is fully dry before adding bedding. In cold weather, a blanket or straw can be placed inside; change regularly if it becomes damp. Check the clips periodically to make sure the house remains tightly assembled.
Packaging: Supplied in a single carton with the panels stacked. The snap‑fit assembly is completed in minutes, with no tools required. A simple instruction sheet is included.
Important notes: This is a single dog house. Place it on a level, solid surface. In very windy areas, additional anchoring may be sensible. New resin may carry a faint odour upon opening; airing the panels outdoors for a day before assembly will allow any scent to disperse. Dimensions are measured manually; a small tolerance is normal.
